Product Description Three Phase 30kv/380v/220v Electrical Transformer    Specifications   1)low noise;low loss;
2)low partial discharge;
3)strong anti-short-circuit ;
4)high impedance;
5)Electric Transformer

    Features:1.  Low loss, and significantly energy-saving. 2. The core laminations are made up from high-quality cold-rolled grain-oriented silicon steel sheets 3. Zigzag directed flow of oil are provided within the windings   4. The regulating winding is a separate winding which apart from the High Voltage main winding 5. The windings of one phase are assembled into an integral phase block before placing into the core. 6. Core frames in the form of a flat plate are used for clamping the core.   7.Transformer tanks are fabricated with steel plates wide enough so that there are no weld joints on each surface. 8.Diaphragm membrane is provided within the conservator, preventing direct contact of oil with air, protecting the oil from aging       Technical Parameters:     Outstanding features as follows:   1. Low loss, low noise   The core laminations are composed of imported high quality grain-oriented cold-rolled silicon steel sheets with chamfered joints and the joints are step-lapped with 5 steps, thus ensuring low loss and low noise. The inside of the tank is lined with magnetic and copper shields, measures have been take for metallic structural pares located in high magnetic field, to deduce stray loss and thereby the total load loss, and to relieve local overhearing.   2. Safe and reliable service   Reliability is the everlasting objective of our company, partial discharge of finished products are constantly kept below 100pC, ensuring that the transformers can be operated under long service voltage and occasional over-voltage without trouble.     3. Easy erection and maintenance   To minimize erection work at sit, transformers are so fabricated that lifting the active part out of the tank for inspection after arrival at sit is not mandatory. Beside, all components to be mounted on the transformer at site have been preassembled before dispatch, and all secondary wirings have been laid down into conduits on the transformer and connected to the terminals in the control cabinet or terminal box. Natural oil circulation and forced air cooling (ONAF) are generally adapted in our 180kV class transformers below 240MVA. 70% nameplate rating can still be achieved in case the fans are out of service. Little maintenance work is required for the cooling devices.     Three Phase 30kv/380v/220v Transformer

Contact us if you need more details on Phase 220v Power. We are ready to answer your questions on packaging, logistics, certification or any other aspects about 3 Phase Power、Small Electrical. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Step Up Electric Transformer