Product Description I. Purpose and Model Meaning:
this cycle reversing electroplating power supply is designed for low voltage high current, low ripple and low ripple cycle reversing electroplating electroplating requirements quickly and design. The power supply has been widely used in wear-resistant workpiece electroplating industry.
type:

S K D F A/ V


Output rated DC voltage
Output rated DC current
Cooling mode code
Use code
Device type code
Cycle reversing code

Cooling mode code: A -- self cooling F -- air cooling J -- oil cooling
Use code: D - electroplating
Device type code: K -- thyristor voltage regulation

II. Technical parameters and characteristics:
1. Adopted standards:
Enterprise standard Q/SCD 001-2000 "silicon, silicon controlled rectifier standard"
2. Main technical parameters:
rated output voltage: + V.
rated output current: A;
input power: 380 + / - 10%, 50 to 60 hz;
stable voltage, stable current accuracy of + / - 1%;
soft start time adjustable 0-180 seconds;
load rating for the "I", that is, 100% rated current work continuously.
3. Product features:
① It has the function of automatic voltage stabilizing and current limiting, current stabilizing and pressure limiting.
● Voltage stabilizing and current limiting function: when the rectifier works in this state, if the load changes, the voltage is stable and the current changes with the load. When the current reaches or will exceed the rated current, it will automatically be in the current limiting state, that is, the maximum current does not exceed the rated current, and the voltage will drop.
● Current stabilizing and voltage limiting function: when the rectifier works in this state, if the load changes, the current will be stable and the voltage will change with the load. When the voltage reaches or will exceed the rated voltage, it is automatically in the voltage limiting state, that is, the maximum voltage does not exceed the rated voltage, and the current will drop.
② It has high and reliable over-current and short-circuit protection function.
When the load current exceeds 50% of the rated value, the rectifier will automatically block the output pulse, the operation time is 10ms, and it will be maintained until the shutdown.
③ has the function of phase loss protection
When the three-phase power line is missing phase, the rectifier will automatically block the output pulse, the operation time is 10ms and the voltage of the three-phase power supply is normal.
④ The product is equipped with remote program control box or a computer central control system for the use of multiple machines (need to be specified when ordering).
(5) Cycle reversing can be single cycle or complex cycle, time is arbitrary. (To be stated when ordering)
The main transformer adopts two vacuum dip paint or hot dip paint, drying.
The three-phase integrated trigger control board has multiple protective measures, is a novel high threshold anti-interference strong integrated double pulse trigger circuit, advanced performance, good output waveform, reliable operation, convenient debugging.
⑧ With soft start function, prevent large current impact, to ensure the quality of the coating.
⑨ Using computer standardized design, plastic spraying case, anticorrosive and beautiful.

Contact us if you need more details on CRS Rectifying Power Supply for Electrolysis. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cyclically Power Supply for Electrolysis、Chrome-plated Cyclic Commutating Power Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Electronic Component > Electroplating Rectifier Equipment