Product Description
Model NO.: SC10 Phase: Three Cooling Method:
Oil-Immersed Type Transformer Certification: ISO9001-2000, UL, ISO9001, CCC Frequency Characteristics: Power Frequency Brand: CHINT Material: Silicon Steel Transformer Trademark: Luguan Origin: China Application: Power, Electronic, Lighting Coil: Core-type Transformer Winding Type: Two-winding Transformer Usage:
Power Transformer Shape of Coil: OD Cooling Type: Air Cooling Transformer Origion: Shandong China Specification: Oil-immersed HS Code: 85043490 Dry-type
Distribution Power TransformerPerformance and characteristics:
The core material that is high quality cold silicon sheet adopt 45° multistep full mitre joint with integrative fastening, thus improving flux distribution at joint, reducing the seismic energy of core, no-load loss, no-load current and sound effectively. The high quality copper of class F insulation and international advanced insulation material are used for HV winding, and for high capacity winding, heat dissipation airway in axial will be used, thus having a good performance of anti-current surge, anti-temperature variation, anti-crack and heat dissipation. The winding adopts multi-stage subsection cylinder construction with strong capacity of withstanding overvoltage and low partial discharge level, after vacuum drying, the process of pouring and solidify of winding molds will be achieved according to proforma process curves, and precision process control insure that there is no pore. The LV winding is of foil type to solve the problem of unbalanced ampere-turn of low-voltage and high -current winding with wire-wound, meanwhile, there is no axial turn and winding helical angle for foil-type winding, it can remove the axial force at short circuit effectively to insure that the current density can be adjusted in axial according to load distribution of HV winding, and reduce radial force at LV sudden short circuit. The end of winding will be sealed and solidified by resin to avoid various foreign matters and humidity.
SC(B)10-50~2500/35resin moulded dry-type distribution power transformer:
specification | No-load loss(W) | On-load loss(W)(120ºC) | Short circuit impedance % | No-load current % | Overall dimension /shell dimension |
Length of body | Width of body | Longitudinal installation dimension of body | Horizontal installation dimension of body and shell | Height of body | Length of shell | Width of shell | Height of shell |
SC10-50/35 | 450 | 1430 | 6 | 2.8 | 1090 | 730 | 660 | 660 | 1240 | 2000 | 1600 | 2200 |
SC10-80/35 | 550 | 2040 | 2.4 | 1150 | 730 | 660 | 660 | 1240 | 2000 | 1600 | 2200 |
SC10-100/35 | 630 | 2090 | 2.4 | 1150 | 730 | 660 | 660 | 1360 | 2000 | 1600 | 2200 |
SC10-125/35 | 740 | 2470 | 2.4 | 1200 | 730 | 660 | 660 | 1340 | 2000 | 1600 | 2200 |
SC10-160/35 | 795 | 2820 | 1.8 | 1240 | 920 | 820 | 660 | 1380 | 2000 | 1600 | 2200 |
SC10-200/35 | 880 | 3330 | 1.8 | 1350 | 920 | 820 | 660 | 1490 | 2000 | 1600 | 2200 |
SC10-250/35 | 990 | 3800 | 1.8 | 1550 | 920 | 820 | 820 | 1560 | 2600 | 1600 | 2200 |
SC10-315/35 | 1180 | 4520 | 1.6 | 1615 | 920 | 820 | 820 | 1610 | 2600 | 1600 | 2200 |
SC10-400/35 | 1380 | 5420 | 1.6 | 1630 | 920 | 820 | 820 | 1730 | 2600 | 1600 | 2300 |
SC10-500/35 | 1620 | 6650 | 1.4 | 1690 | 920 | 820 | 820 | 1830 | 2600 | 1600 | 2300 |
SC10-630/35 | 1860 | 7700 | 1.4 | 1750 | 920 | 820 | 1070 | 1945 | 2600 | 1600 | 2500 |
SC10-800/35 | 2160 | 9120 | 1.2 | 1750 | 1170 | 1070 | 1070 | 2075 | 2600 | 2000 | 2500 |
SC10-1000/35 | 2430 | 10450 | 1.2 | 1800 | 1170 | 1070 | 1070 | 2150 | 2600 | 2000 | 2700 |
SC10-1250/35 | 2840 | 12730 | 1.0 | 1860 | 1170 | 1070 | 1070 | 2200 | 2600 | 2000 | 2700 |
SC10-1600/35 | 3240 | 15490 | 0.9 | 2100 | 1170 | 1070 | 1070 | 2240 | 2800 | 2000 | 2700 |
SC10-2000/35 | 3830 | 18240 | 0.9 | 2150 | 1170 | 1070 | 1070 | 2265 | 2800 | 2000 | 2700 |
SC10-2500/35 | 4460 | 21850 | 0.9 | 2200 | 1170 | 1070 | 1070 | 2350 | 2800 | 2000 | 2700 |
Company Information
Shandong Weite Transformer Factory, was founded in 1969, is one of national large Enterprise,
The company covers area of 200,000 square meters and the construction area is about 70,000 square meters. The total asset is 1.3billion RMB and the fixed asset is 350million RMB.
The company focuses on providing economic transformer solutions for customers including engineering, manufacturing, executing, commissioning and repairing for different kind of power transformer (4kv -220kv),
The main products include 220KV (or below 220KV) power transformers and power substations
Three phase double (three)- winding power transformer,
Generator power transformer,
Auto power transformer ,
Movable power transformer,
The box-type power transformer substation etc.
FAQ1. Are you a factory or a trading company? Shandong Weite Transformers Factory is a professional manufacturer of
power transformers and cabinet combined substations since 1988 and had been certificated State Grid Supplier
2. What's your main power transformers?
Three phase double (three)- winding power transformer,
Generator power transformer,
Auto power transformer ,
Movable transformer,
Box-type power transformer substation etc
3.Could I be your agent?
Yes, Agent wanted for international market in different countries .
4.Is OEM available?
Yes, OEM service is available for power transformer
5.Are the products tested before shipping?
Yes, all power transformers are tested before shipping
6.What's your quality guarantee?
We have 100% quality guarantee to customers. We will be responsible for any quality problem.
7.What's benefit will you bring?
High quality and good after sale service and lower processing cost
Contact us if you need more details on Power Transformer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Oil-Immersed Type、Two-Windings. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Dry-type power Transformer